George Ball Of Wilmington North Carolina

- 5.0 Publications and Patents Authored/Coauthored By George L. Ball By Category

5.1 Energetic Material Processing, Products, and Safety
5.2 Energy Related
5.3 Composite Materials and Physical Testing
5.4 Environmental/ Waste Related
5.5 Foam Based Functional Materials
5.6 Specialty Plastic Materials and Processes
5.7 Adhesives/ Interlayers
5.8 Biomaterials/ Systems
5.9 Acoustical Applications
5.10 Unpublished Presentations
5.11 Patents
Menu Return To Resume Page
Menu Return To Menu Page
© 1996-2011 George L. Ball

Send Me An E-Mail If You'd Like To Learn More About Any Of These Publications
SOURCE:
George L. Ball, Wilmington, NC - November 15, 1996
Click Here
Menu Return To Top
GEORGE L. BALL PUBLICATIONS
Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.1 Energetic Material Processing, Products, and Safety Publications

"Preparation Of Kel-F Microcoated High Surface Area Detonator Grade PETN Explosive Powder," Energetic Materials Technology, EG&G Mound Applied Technologies, Miamisburg, OH 6/1/95

"Energetic Materials Training for Safe Shutdown Operations," Student Manual and Training Course, Course Number 070108, Mound Facility, Miamisburg, OH 1/5/95


"Detonator Grade Explosive Powders, A Perspective From The Developers and Manufacturers," DOD/DOE Technology Coordinating Group, Technical Progress Review, Lawrence Livermore National Lab, Livermore CA 12/6/94


"Coating of PETN Powder with Kel-F 800 Plastic," Development Product Index, Mound, Miamisburg, OH 8/15/94


"Preparation of Magic Material," Development Product Index, Mound Facility, Miamisburg, OH 7/28/94

"Recrystallization of H(igh) S(urface) A(rea) PETN Powder," Development Product Index, Mound Facility, Miamisburg, OH 7/27/94

"Explosives Safety Guidance," Technical Manual, MD-90101, Issue 1, Mound, Miamisburg, OH 7/25/94

"Standard Operating Procedure for Facilities for Processing or Testing of Secondary and IHE Explosive Powders," SOA940346-000, Mound, Miamisburg, OH 7/20/94

"Mound Explosives Operations Standard Operating Procedure For Building 27 (Processing of Secondary and IHE Explosive Powders)," SOA920684-000, Mound, Miamisburg, OH 6/14/94

"Coating of HNS Powder With Kel-F 800 Plastic," Development Product Index, Mound Facility, Miamisburg, OH 4/4/94

"Energetic Materials Development Explosives Safety Guidance," version 2.04, Mound, Miamisburg, OH 6/23/93

"Solvent/Non-Solvent Recrystallization Processes for Explosive Powders," Process Waste Assessment, Mound Facility, Miamisburg, OH 9/30/92

"Surface Chemistry of a Micro-coated Energetic Material Pentaerythritoltetranitrate (PETN), Surface and Interface Analysis," 10, 273, (1987) Journal, 10/01/87

"Pourability Enhancement of PETN Explosive Powders," The Journal of Energetic Materials Journal, 5, 35, 3-87, 3/1/87

"Microcoating and Prilling of Explosive Powders," LLNL AIS Design Review Meeting Presentation Kansas City, MO 09/24/85

"The Preparation and Surface Characterization of Very Thin Plastic Coatings on an Explosive Powder," DOE Adhesive Materials Conference/JOWOG-28 Presentation, Miamisburg, OH 6/11/85

"Surface Characterization of Very Thin Plastic Coatings," MRC-Mound Technology Update - 2, Miamisburg, OH 3/2/85

"Utilization of Microencapsulation Coating Techniques to Achieve Prilling and Enhance the Pourability of PETN Explosive Powder," MLM Report, MLM-ML-84-52-0003, Miamisburg, OH 12/15/84

"Tailoring of Explosive Powders Using Microencapsulation Techniques," JOWOG-9 26th Meeting Presentation AWRE, Aldermaston, England 6/4/84

"Microencapsulation of Explosive Powders," Seminar Group Meeting, Los Alamos National Laboratory, Los Alamos, NM 4/25/84

"Pourability Enhancement of PETN Explosive Powders," DOD/DOE/Industry Conf., New Manufacturing Tech. Presentation Orlando, FLA 11/06/83

"Pourability Enhancement of Explosive Powders," Quarterly Report, MRC/Mound, Miamisburg, OH 6/01/83

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS
Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.2 Energy Related Publications

"Self-Contained, Expendable, Pyrotechnic Blankets for Heat-Treating Internally Sealed Concrete," Final Report, Contract DOT-FH-11-9314, MRC-DA-907, July 1979

"Energy Storage for Solar Air Conditioning Applications Utilizing a Form-Stable, High Density Polyethylene Pellet Bed," Proceedings of the Solar Energy Storage Workshop, San Antonio, Texas, March 1979

"Environmental Implications of the Presidents Energy Initiative, Phase I," Final Report. Contract EPA 68-01-5132, DOW No. 3, MRC-DA-901, June 1980

"Low-Cost Mirror Concentrators, Based on Double-Walled, Metallized, Tubular Films," in Proceedings of the Annual DOE Active Solar Heating and Cooling Contractors' Review Meeting, (26-28 March 1980), U.S. Department of Energy (CONF 800340), Washington, D.C., issued June 1980

"Non-Concentrating Collectors for Solar Heating Applications," Final Report, Contract DOE EG-77-C-04-4147, MRC-DA-867, March 1979

"Environmental Implications of the President's Energy Initiative, Phase II - Multidimensional Parameter Analysis," Final Report, Contract EPA 68-01-5132, DOW No. 3, MRC-DA-979, June 1980

"Low-Cost Mirror Concentrator Based on Inflated, Double-Walled, Metallized, Tubular Films," Final Report, Contract DE-AC04-78AL04227, MRC-DA-944, July 1981

"Form-Stable Crystalline Polymer Pellets for Thermal Energy Storage," ACS Polymer Preprints, 19(1), p. 687-692, March 1978

"Form-Stable Crystalline Polymer Pellets for Thermal Energy Storage - High Density Polyethylene Intermediate Products," ORNL/Sub-7398/4, DOE Contract No. UCC-ND 7398, MRC-DA-760, March 1978

"Pyrotechnic Methods for Heat Treating Internally Sealed Concrete," Phase I Report, Department of Transportation, Contract DOT-FH-11-9314, January 1978

"Sunlight Concentration for Silicon Rod Solar Cells," Proceedings of the Photovoltaic Solar Energy Conference, Luxembourg, September 1977, Reidel, issued 1978

"Survey of Potential Candidate PBX Binder Materials," Final Report, MRC-DA-714, Department of Energy, LLL PSA 6454103, September 1977

"Fabrication of Prototype Reflecting and Dielectric Compound Parabolic Solar Concentrators for Evaluation with Photovoltaic Devices," Final Report, MRC Job No. 60-700.0220, MRC-DA-631, December 1976. (Company Confidential)

"Form-Stable Crystalline Polymer Pellets for Thermal Energy Storage," Final Report, DOE Contract EY-76-C-05-5159, MRC-DA-667, July 1977

"Investigation of a Laboratory Process for Preparing Laser Fusion Targets," Final Report, P.O. 7900705, Lawrence Livermore Laboratory, Report No. MRC-DA-509, October 1975

"Utilization of Micro-capsules in Solar Energy Storage - Summary Report," MRC-DA-532, February 1976

"Feasibility Study into Utilization of Low-Cost Plastic Materials and Processes in Solar Collectors," IRAD 7917, Interim Report, December 1974

"Plastic Light-Transmission Fiber Optics by Refractive Index Gradient Approach," IRAD 7895, Final Report, MRC-DA-436, July 1974

"The Pyrolysis of Industrial and Municipal Plastic Wastes - A Survey and Study," MRC-DA-189, May 1969

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS
Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

-
5.3 Composite Materials and Physical Testing Publications



"Bagasse-Fiber-Reinforced Composites," Journal of Elastomers and Plastics, Vol, 13, 46-73, January 1981

"Alternative Low Cost Roofing Material Candidates Based on Bagasse Filled Composites," Journal of Elastomers and Plastics, Vol, 12, 18-44, January 1980

"Fabrication of Graphite Reinforced Advanced Composites," Task Report, U.S. Navy, Contract N00173-77-C-0198, January 1978

"Development of Low-Cost Roofing from Indigenous Materials in Developing Nations," Agency for International Development, Department of State, Washington, D.C., Contract No. AID/CM/ta-C-73-12, Final Report, MRC-DA-751, February 1978

"Experimental Program for Low-Cost Roofing Materials Development in Ghana," to Council for Scientific and Industrial Research, Building and Roads Research Institute, Kumasi, Ghana, September 1976
Contribution to "Designing New Low-Cost Roofing for Developing Countries," Development Digest, Vol. XIV, No. 2, April 1976

"Development of Low-Cost Roofing from Indigenous Materials in Developing Nations," Agency for International Development, Department of State, Washington, D.C., Contract No. AID/CM/ta-C-73-12, Second Annual Report, MRC-DA-517, December 1975

"Evaluation of the Suitability of Intrinsic Viscosity Measurements to Determine the Onset of Significant Molecular Weight Degradation in Polycarbonate Moldings," LLL P.O. 6121509, Final Report, MRC-DA-333, July 1972

"Review of TYTRON7 Floor Tile Adhesive Systems," Special Report, August 1970

"The State-of-the-Art, Recommendations and Proposed Development Programs for Reinforced Thermoplastics," Final Report, MRC Job 1557, April 1970

"Polymer Filler Variables," Final Report, April 1969

"The Development of a Ballistic Test Capability, Correlation of the Physical Properties of Amorphous Polymers to Ballistic Performance, and the Role of Plasma and Flame Spraying in Armor Materials," IRAD Projects 7654 and 7671, December 1968

"Physical and Mechanical Properties of Cerex 250," Final Report, February 1968

"Lightweight Armor Research and Development," Final Report, January 1968

"Recommended Practice for Evaluation of the Dynamic Mechanical Properties of Plastics by Means of the Ball Rebound Tester," G.L. Ball, Chairman, ASTM D-20, Section I-O, Draft Proposal, October 1967

"Physical and Rheological Properties of Fluoronitroso Rubbers," Final Report, June 1967

"Boron Filament Packaging," Final Report, July 1966

"Tentative Specifications for Polycarbonate Injection Molding Materials for AEC Applications," Final Report, July 1966

"Tentative Method of Test for Dynamic Mechanical Properties of Plastics by Means of a Torsional Pendulum," G.L. Ball, Chairman for ASTM D-20, Section I-O, D2236-64T, American Society for Testing and Materials, Part 27-701, 1974

"Survey of State-of-the-Art of the Creep and Stress Relaxation Properties of Plastic and Rubber Materials," Final Report, October 1963

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.4 Environmental/ Waste Related Publications

"Cleaning and Decontamination of Explosive Processing and Support Equipment In Building 27," Development Product Index, Mound Facility, Miamisburg, OH 1/31/95

"Waste Plastic Recycling - Information Exchange; Volume I - Summary Report and Volume II - Contributed Papers," Final Report EPA 68-03-2550, W.D. 8, MRC-DA-1077 (NATO/CCMS-123), April 1981

"Evaluation of Astroturf's Response to Heat and Other Environmental Factors," Final Report, Monsanto Company, MP&R, MRC Job No. 401.0040, Report No. MRC-DA-936; 29 February 1980

"NATO/CCMS Proposed Plastic Waste Recovery Studies," IERL, Environmental Protection Agency, Cincinnati, Contract 68-03-2550, October 1978

"Feasibility of Microencapsulation of Lasso, Avadex BW, and Roundup by Coacervation Techniques," Final Report, MRC Job No. 60-700.0510, MRC-DA-593, November 1976. (Company Confidential)

"Adsorption of Gases onto Spheropores A & B, A Joint Study with the University of Massachusetts," Final Report, MRC-DA-522, January 1976

"Investigation of Methods and Tests to Permit Recycling of Scrap Plastics," U.S. Army Natick Laboratories, Natick, Mass., Contract No. DAAG17-73-C-0235, Final Report, MRC-DA-430, June 1974

"A Study of the Radiation Stability and Means of Fabricating Plastic Insulating Films for Dosimeters," Final Report, Department of the Army, Contract No. DAHC 20-68-C-0127, MRC-DA-323, August 1971

"Exploratory Membranes for Use in Reverse Osmosis Separation," Final Report, MRC Job 777, April 1971

"Retention of Physical and Electrical Properties of Elastomers and Potting Compounds as a Function of Environment and Time," Final Task Report, Contract F33615-69-C-1190, June 1990

"Evaluation of High Temperature Fire and Explosion Suppressant Configurations for Aircraft Fuel System Applications," Final Report, Contract F33615-67-C-1716, MRC-DA-239, March 1970

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.5 Foam Based Functional Materials Publications

"Preparation, Testing and Delivery of Low Density Polyimide Foam Panels," Final Report, Contract NAS2-8440, NASA, Ames Research Center, Report No. NASA CR-137670 (MRC-DA-490), April 1975

"High Temperature Polyimide Foams for Shuttle Upper Surface Thermal Insulation," Final Report, Contract NAS1-12990, NASA, Langley Research Center, Report No. NASA CR-132572 (MRC-DA-465), December 1974 (issued March 1975)

"Process for Preparation of Developmental Quantities of Polyimide Microballons," Final Report, MRC Job No. 7011, Report No. MRC-DA-479, February 1975. (Company Confidential)

"A New Cost Effective Plastic Shipping and Packaging Container System," Final Report, U.S. Air Force Packaging Evaluation Agency, Contract F33601-72-C-0424, MRC-DA-420, 29 March 1974

"Feasibility Study into Fire-Resistant Resilient Cushioning Materials Based on Polyimides," Final Report, MRC Job No. 1675, MRC-DA-403, 11 February 1974

"High Performance Urethane Foam Cushioning and Packaging Materials," Final Report, AFPEA Contract No. F33601-72-C-0548, October 1973

"Novel Foams and Porous Structures," Appl Poly Symp No. 22, 1-2, (1973)

"Development of Polyimide Foams for Container Cushioning," Final Report, Contract NAS9-12246, May 1972

"Development of a Hand-Mix Flexible Urethane Foam Kit," Final Report, Contract F33601-71-C-0799, April 1972

"Pourable, Trowelable Epoxy Foams Preparation Procedures," U.S. Air Force Systems Command, Final Report, 10 January 1972

"Foam Packages for Helmet Liner Applications," Final Report, Contract F33615-69-C-1190, November 1970

"A Technique for Applying Thin Impermeable Films to the Surface of Porous Syntactic Foam," Final Report, Sandia P.O. 185616, July 1970

"A Feasibility Study for the Production of Perforated Hollow Plastic Spheres," Final Report, AFML-TR-69-42, March 1969

"Porous, Open-Celled Metal and Inorganic Foams," Final Report, October 1967

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS
Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.6 Specialty Plastic Materials and Process Publications

"Antenna Grout Replacement System - Phase II," Final Report, Contract No. JPL 955144, MRC-DA-910, January 1980

"Antenna Grout Replacement System - Phase I," Final Report, Contract No. JPL 955144, MRC-DA-866, March 1979

"High Performance Polymeric Gasket and Seal Materials," Final Report, Fisher Controls Company, MRC Job No. 60-700.0060, MRC-DA-561, June 1976. (Company Confidential)

"Development of Elastic Fiber Components," Final Report, MRC-DA-415, Job No. 1643, 15 March 1974

"Elastomers for High Temperature (3501) Hydraulic Fluid Seals," Final Report, MRC Job 7772, December 1971

"Application of Materials and Processes for Limited War," Final Report, Air Force Materials Laboratory, Contract No. F33615-69-C-1190, MRC-DA-271, December 1970

"Copolymer 250B Films for Radiation Dosimeters," Final Task Report, Contract DAAHC20-68-C-0127, November 1970

"O-Ring Testing-Experimental Compounds," Final Task Report, Contract F33615-69-1190, April 1970

"Fuel Impermeable Coatings for ABS Fuel Tank Liners," Final Task Report, Contract F33615-69-C-1190, March 1970

"Filler and Polymer Variables," Final Report, LRL P.O. 7931603, July 1968

"Compounding and Curing Thin Sheets of Carboxyl Nitroso Rubber and EPR 404 Rubber," Final Report, July 1967

"Injection Molding Research and Development," Final Report, March 1967

"Development of Injection Molding Process for Press Parts," Final Report, LRL P.O. 6881103, February 1967

"Optical Properties of Tinted Polycarbonates," Final Report, June 1966

"Research and Development on Die Design and Injection Molding," Final Report, March 1966

"Research and Development on Die Design and Injection Molding," Final Report, LRL Subcontract 212, No. 1, December 1965

"High-Temperature Liquid Materials for Potting of Electronic Components," Final Report, U.S. Navy, Contract NObs-78294, December 1960

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS
Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.7 Adhesives/ Interlayer Materials Publications

"Research on Heat Resistant Transparent Interlayers Based on the Ethylene Terpolymer," Final Report, Contract F33615-75-C-5090 (AF-AFML), Job 40-500.0020 (2615), AFML-TR-76-109, MRC-DA-533, August 1976

"An Elastomeric, Thermoplastic, Polycarbonate-Compatible Aircraft Interlayer Useful from -65 to 3501F," In: "Conference on Aerospace Transparent Materials and Enclosures," Technical Report AFML-TR-76-54, April 1976

"Engineering Data on Ethylene Terpolymer as an Adhesive for Polycarbonate Composite Aircraft Transparencies," Final Report, Contract F33615-71-C-1321, July 1972

"Preparative Procedures for Ethylene Terpolymer Transparent Adhesive Sheets," Final Report, MRC-DA-324, April 1972

"Low Density Epoxy Adhesive," Final Report, LRL P.O. 2838909, July 1971

"A Thermoplastic Transparent Adhesive for Bonding Polycarbonate to Glass," Final Report, Contract DAAG46-71-C-0007, July 1971

"Evaluation of Corrosion Inhibiting Coatings," Final Report, MRC Job No. 1598, April 1971

"Development of an Epoxy Rubber," Final Report, MRC Job 7744, December 1970

"Evaluation of Improved Transparent Materials and Adhesives for Ballistic and Impact Shields," Final Task Report, Contract F33615-67-C-1315, AFML-TR-70-167, August 1970

"Development of a Transparent Adhesive Compatible with Polycarbonate for Use in Ballistic Shields," Final Report, Contract F33615-69-C-1190, AFML-TR-144, August 1970

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS
Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.8 Bio Materials/ Systems Publications

"The Monsanto Polyacrylonitrile Hollow Fiber Artificial Kidney," J. Biomedical Materials Research 6:59-79, 1972

"New Blood-Compatible Polymers for Artificial Heart Applications," J. Biomed. Mater. Res. Symp., 1:105-127, 1971

"Research on Materials and Devices for Artificial Kidneys, Task I Development of Non-Thrombogenic Cannulas, Hemodialysis Tubing and Systems," Annual Report, Contract PH43-67-1161, MRC-DA0257, September 1970

"The Monsanto Polyacrylonitrile Hollow Fiber Artificial Kidney," presented at Symposium on Membrane Processes, ACS Meeting, Chicago, 13-18 September 1970 (published in Symposium Proceedings).

"Materials and Components for Circulatory Assist Devices," Semi-Annual Report, MRC-DA-246, May 1970

"New Blood-Compatible Polymers for Artificial Heart Applications," ACS Meeting, Toronto, Canada, 25-26 May 1970

"Research on Materials and Devices for Artificial Kidneys," Second Annual Report, Contract PH43-67-1161, MRC-DA-234, February 1970

"Materials and Components for Circulatory Assist Devices," Third Annual Report, Contract PH43-66-975, MRC-DA-226, January 1970

"The Monsanto Polyacrylonitrile Hollow Fiber Artificial Kidney," Proceedings, 3rd Annual Contractors Conference, Artificial Kidney Program, National Institute of Arthritis and Metabolic Diseases, January 1970

"Research on Materials and Devices for Artificial Kidneys," Final Report, January 1970

"Materials and Components for Circulatory Assist Devices," November 1969

"Materials for Circulatory Assist Devices," Proceedings of the Artificial Heart Program Conference, National Heart Institute, June 1969

"Materials and Components for an Artificial Heart," Final Report, June 1967

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.9 Acoustical Applications of Plastics Publications

"Development of a Viscoelastic Composition Having Superior Vibration Damping Capability," J. Acoust. Soc. Am. 39:663-72, 1966

"Monsanto Research and Development Leading to LD-400," Joint Press Conference, Monsanto Company and Lord Manufacturing Company, New York, 21 July 1964

"Vibration Damping Materials-A History, Development, and Future," Press Conference, MRC, 25 October 1963

"Plastics for Commercial Vibration Damping," Final Report, Monsanto Company, 29 May 1963

"Plastics for Hull Vibration Damping," Dept. of Navy, Contract No. NObs-88505, Final Report, May 1963

"Plastics for Hull Vibration Damping," Dept. of Navy, Contract No. NObs-84155, Annual Report, January 1963

"Viscoelastic High Damping Materials," 65th Meeting, Acoustical Society of America, New York, May 1963; published in J. Acoust. Soc. AM. 35:802(A), 1963

"Plastics for Hull Vibration Damping," Proceedings, Structural Vibration Damping Conference, Mare Island Naval Shipyard, Vallejo, Calif., October 1962

"Development and Evaluation of Materials for Reducing Ship Hull Plate Vibration," Dept. of Navy, Contract No. NObs-77089, Final Report, July 1960

"Sound Absorption Properties of Flexible Foams," American Journal of Physics 28:761, 1960

"The Sound Absorption Properties of Urethane Foams," Off. Dig. Fed. Soc. Paint. Technol., 32:817, 1960

"The Sound Absorption Properties of Urethane Foams," unpublished Master's thesis, under M. Schwartz and J.S. Long, University of Louisville, 1959

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.10 Unpublished Presentations

"Amateur Digital Photography And Illustration - An Updated Perspective"," Sea Trail Homeowners Association, Sunset Beach NC, 9/16/2003

"Amateur Digital Photography And Illustration - A Perspective"," Adult Scholar Leadership Alumni Meeting, UNCW, Wilmington NC, 6/17/2003

"Mound Operational Readiness documentation for the Powder Processing and Blending Facility (Bldg. 85)," LANL/Mound/Pantex Joint Explosives Powder Meeting, 7/15/92

"Mechanical Testing and characterization of Explosive powders and Powder Compacts," JOWOG-9 Workshop, Livermore, CA, 3/13/91

"What We've Done at Mound," Explosives Powder Development Seminar, Pantex Plant, Amarillo, Texas, 6/5/90

"Overview of Explosives Development Activities At Mound," Explosives powder and Development Seminar, Pantex Plant, Amarillo, Texas, 6/5/90

"Tailoring of Explosive powders Using Microencapsulation Techniques," JOWOG-9 26th Meeting, Atomic Weapons Establishment (AWE), Aldermaston, England 10/11/89

"Sensitivity Profiles of Detonator Grade PETN Explosive Powders," JOWOG-9 30th Meeting, AWE, Aldermaston, England 10/11/89

"Development of Detonator Grade TATB Explosive Powders," JOWOG-9 30th Meeting, Atomic Weapons Establishment, Aldermaston, England 10/11/89

"Overview of Explosives Development Activities," Explosives Powder Development Seminar, Mound Plant, Miamisburg, Ohio, 10/18/88

"Energetic Materials Processing and Support Facility," Status and Review, Mound Plant, Miamisburg, Ohio 8/15/88

"Energetic Materials Development and Engineering," Summary and Scope, Mound Plant Management, Miamisburg, Ohio 6/27/88

"Microcoating and Prilling of Explosive Powders," LLNL AIS Design Review Meeting, Kansas City, MO 9/24/85

"The Preparation and Surface Characterization of Very Thin Plastic Coatings on an Explosive Powder," DOE Adhesive Materials Conference/JOWOG-28, Miamisburg, Ohio 6/11/85

"Tailoring of Explosive Powders Using Microencapsulation Techniques," JOWOG-9 26th Meeting, AWRE, Aldermaston, England 6/4/84

"Overview of Explosives Development Activities," Explosives Powder Development Seminar, Los Alamos, NM 4/25/84

"Pourability Enhancement of PETN Explosive Powders," DOD/DOE/Industry Conf., New Manufacturing Technology, Orlando, FLA 11/6/83

Menu Return To Top

======================================================

GEORGE L. BALL PUBLICATIONS Send Me E-Mail If You'd Like To Learn More About Any Of These Publications

- 5.11 Patents


United States

4,182,398 Crosslinked Crystalline Polymer and Methods for Cooling and Heating

4,137,364 Transparent Laminate and Adhesive Film

3,969,286 Epoxy Resin - Trowelable Foam

3,923,757 Optically Clear Adhesive for Glass Polycarbonate Resin Laminates

3,399,104 Vibration Damping Composition and Laminated Construction

3,399,103 Vibration Damping Composition and Laminated Construction

3,129,277 Dielectric Medium Containing Tercyclohexyl

3,113,993 Electrical Devices Comprising Biphenyl Silicate

3,068,434 Electrical Devices

United Kingdom

1,116,814 Viscoelastic Damping Material


Canada

1,107,050 Crosslinked Crystalline Polymer and Methods for Cooling and Heating

=======================

Reference: ver glb-die file: glbpubs1.wp5


[George Loyal Ball Sr. Patent]
U. S. Patent of G. L. Ball Sr. 1892


See Below For George L. Ball, Jr.

[George Loyal Ball III Patent]
U. S. Patent of G. L. Ball III 1968


The George L. Ball's Were Inventors



Menu Return To Top

======================================================

If You Would Like Any More Information on The Publications

Please send me an E-Mail Note to the following address[MAIL ME IMAGE]

E-Mail through Juno to Wherever I am


Menu Return To Top

© 1996-2011 George L. Ball

Created by George L. Ball Wilmington NC